News Category

The cause of looseness of warp and weft wire and prevention methods

Views : 674
Update time : 2018-04-17 10:39:18
1. Causes for woven wire mesh warp and weft wire loosening
(1) If all warp and weft threads are inconsistent, the weft threads in the weaver mesh will be soft and will loosen at the harder weft and latitude. because
The hard warp has small curvature in the net, and the shrinkage rate is small, so the more weaving, the looser, so that the warp and weft at the hard warp are loose and loose.
(2) The warp and weft threads of the net lack tension, and the latitude and longitude are easy to loosen.
(3) The splicing time is too late and looseness of the latitude and longitude also occurs.
(4) When the steel cymbal blade is too thin and the boring hole is large, the woven wire mesh is able to loosen because the blister film is too thin and the weft is bent after the weft is inserted. Larger deformation, warp and weft are not easy to intertwine.
(5) Light-grade and extra-light metal square hole nets, because the latitude and longitude are very small and the warp and weft angles are very small.Intertwined not tight.
 
2. The woven wire mesh warp and weft wire loosening prevention method
(1) Use a stiffer weft yarn to increase the weft tension.
(2) The warp threads in weaving maintain moderate tension.
(3) According to the diameter of the wire, choose a reasonable bore size steel file